Wednesday, 6 January 2016

Fuel Tank Restoration (Part 2)

Hi

I have cleaned all of the rust from inside and outside the fuel tank with the rust remover.  The stuff is amazing!  I then used a wire brush on a drill to clean the metal.  For the difficult-to-reach parts (where the gas shut-off valve screws into the tank, as well as, the indents in the tank) I used a Dremel tool.  I then cleaned the tanks with a clean rag soaked in thinners and sprayed it with a primer.  Sounds easy, but it took about 8 hours to do.

Here is a photo of the fuel tank before I laid on the grey MS Primer.


No comments:

Post a Comment