Sunday 17 April 2016

Reassembling the Rear Star Hub

Hi. 

I am busy with the reassembling of the rear star hub - here is a picture from the WL Parts Manual:



The 1st step is (after sandblasting and painting the hub) was to replace the grease fitting. 


Next, I greased the big bearing and installed the bearing, with the thrust washer and the retaining clip. 



Next, I placed the large cork washer in position. 



I then placed the bearing cover washer over the cork washer and installed the second retaining clip. 



I then installed the inner hub sleeve and flipped the star hub over to install the bearing washer and the other bearing 


But I then hit a snag - I don't have Part 3982-35:  the two lock washers that fits into the star hub.

No comments:

Post a Comment